Quick Answer: What Is The Best Wood Deck Sealer?

Should I stain or seal my deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays..

What deck stain lasts the longest?

Solid. Just like regular paint, solid stains hide the grain of wood, and the best should last three to five years on a deck, the longest of the three types of stains.

Is it too late to seal my deck?

As a general rule, expect to wait approximately 30 days before scheduling professional deck sealing. However, in the case of intense wood grains such as cedar and mahogany, you may want to seal the deck earlier — perhaps within one or two weeks.

What happens if I don’t seal my deck?

But when it happens this wear will be evidenced by greying, as the top layers of the lumber oxidize from sun and rain, and also splintering, warping, rotting, and cracking. It may be many years before an untreated deck becomes completely unusable.

What is the best way to apply deck sealer?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

Do I need to seal my deck every year?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

What is the best way to apply Thompson’s Water Seal?

Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. If over applied, remove excess before it dries by redistributing to dry areas or wiping off.

Can I put Thompsons Water Seal over stain?

Answer: Q: Do I need to apply a clear waterproofer over my stain? Not with Thompson’s® WaterSeal® exterior stains. They are specially formulated so you get unsurpassed waterproofing protection and beautiful color at the same time.

How often should you seal a wood deck?

one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Top 5 Wood Stain Colors For Wooden DecksFawn st-212.Chestnut Brown st-201.Desert Tan st-208.Butternut sol-213.Chestnut Brown sol-201.

Should you put a sealer over stain?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats.

What is the best way to protect a wood deck?

Protect the investment in your wooden desk by taking these 10 preventive measures:Don’t trap dirt. … Catch that grease. … Sweep it up. … Shovel it off. … Clean and seal regularly. … Take special steps for a new deck. … No matter the age, always make sure your deck is sealed. … Even pressure treated wood needs to be sealed.More items…•

Should I use Thompson Water Seal on pressure treated wood?

Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. … The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

Which is better oil or water based deck stain?

Oil based stains are much easier to apply, because they penetrate wood more easily, they will adhere to the wood. Because oil based stains penetrate so well, they will resist peeling better than a poorly applied water based stain. You’ll notice that when the fail, they simply fade away, rather than peel.

Is there a deck stain that doesn’t peel?

A: Many experts agree that the best finish for pressure-treated wood is a semi-transparent stain. This stain penetrates the wood and won’t peel, unlike some solid-colour stains, which sit on the surface like paint and can peel and flake under some conditions.