Question: How Much Does It Cost To Pave A Driveway With Blacktop?

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,719 on average, with a typical range between $2,930 and $6,559.

This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor.

If you need replacement, you’ll pay $8 to $15 per square foot..

How much does it cost to pave a 2 car driveway?

The average cost for a 2-car driveway paving and installation is $3,600 with most homeowners spending between $950 and $7,940. The price can vary greatly by region (and even by zip code). Get free estimates from pros near you.

What is the cheapest type of driveway?

2. Gravel. This is one of the cheapest alternatives to asphalt driveways by far, costing very little to have installed. The average gravel driveway consists of hard, angular gravel laid throughout the driveway.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

How much does it cost to pave 1 acre?

The PAVE-A-LOT works just as well as the expensive units but sells for a fraction of the cost. Every aspect of the PAVE-A-LOT is easy to learn and the paving can be done at your convenience. This method of paving will save you at least half the cost, which is about $10,000.00 to $12,000.00 per acre.

How much does it cost to pave a driveway with cement?

The most basic method ranges from $10 to $12 per square foot.

How much does it cost to pave a quarter mile driveway?

An asphalt driveway costs about $2-$5 a square foot, or $1,200-$3,000 for 12’x50′ to $31,000-$75,000 for a 12′ lane a quarter mile long.

Can I pave my own driveway?

DIY paving is possible in certain situations, although you can’t go wrong when hiring an experienced paving contractor. A properly installed paved driveway will add value to your home and last for years with minimal maintenance. Consider whether your own efforts will produce a driveway of this quality.

How can I pave a cheap driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.

What is poor man’s concrete?

We have a few companies locally that offer “poor man’s concrete”. I’m not sure exactly what it is, but I’ve seen it in driveways and such. It’s a white powdery material they dump and flatten out and when it gets wet, it’s supposed to harden like cement. But, it’s not as pretty and won’t get as hard.

Can you pave over existing asphalt driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. … A tack coat is normally applied on the existing asphalt surface to help the new asphalt adhere to the existing surface. An overlay is usually installed at an average depth of 1.5” to 2” inches thick depending on the project.

Does paving driveway increase home value?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. … While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.

How much does it cost to pave a paver driveway?

Driveway pavers cost between $10 and $50 per square foot. Assuming a standard 16-by-38-foot surface area, the total cost ranges between $6,100 and $30,400, or $17,000 on average. Depending on the exact material and location, that price can increase to $80 per square foot, or $49,000 total.

How much does a blacktop driveway cost?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

How much does it cost to pave a small driveway?

Average Driveway Paving CostDriveway TypeCost Per Square FootGravel$.50-2Asphalt$1-5Concrete$3-10Pavers or Bricks$10-50

Is blacktop more expensive than concrete?

The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

What is the difference between blacktop and asphalt?

Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. … Blacktop has a higher mixture of stone than asphalt. It also must be heated to a higher temperature, around 300 degrees, than other types.

How long will an asphalt driveway last?

25-30 yearsThe life expectancy varies based on climate, traffic, and maintenance. It is possible to have asphalt pavement last 25-30 years, but this depends on how strong the base is, the soil types underneath, how well those soils drain, how think the original road, parking lot, or drivewaywas paved.