- Can I pour concrete in a hole full of water?
- How long will wooden posts last in concrete?
- How do you protect a wooden post from rotting in the ground?
- Do you need to pour concrete for fence posts?
- How Long Should Concrete Cure fence posts?
- Is 1 ft deep enough for fence post?
- How deep should a 8 foot fence post be?
- Do I need gravel under concrete?
- What’s the difference between cement and concrete?
- Is Postcrete as good as concrete?
- How long will a treated 4×4 post last in the ground?
- How much concrete do I need for a metal fence post?
- Is 2 feet deep enough for fence posts?
- What is the best concrete mix for fence posts?
- How do you keep fence posts from rotting in concrete?
- How long does a pressure treated post last in the ground?
- How deep does the hole need to be for a fence post?
- Will fence posts rot in concrete?
Can I pour concrete in a hole full of water?
For a structural, engineered assembly, having water in the bottom of a form is a no-no, because it can liquify the soil, and make the final assembly height unstable.
That is, things may settle as the wet mud underneath flows away, and slowly dries out..
How long will wooden posts last in concrete?
Reason being that the old chromated copper arsenate (CCA) wood treatment was banned in 2004 and modern treatments are no where near as good. Life expectancy of posts now is anywhere from 18 months to 5-7 years max.
How do you protect a wooden post from rotting in the ground?
Placing a thick layer of loose gravel at the bottom of the post hole will allow groundwater to trickle through the rocks and down away from the base of the post. This will prevent the post from rotting by keeping it constantly dry.
Do you need to pour concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How Long Should Concrete Cure fence posts?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Is 1 ft deep enough for fence post?
You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
How deep should a 8 foot fence post be?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.
Do I need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
What’s the difference between cement and concrete?
What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.
Is Postcrete as good as concrete?
Postcrete may be used for the purposes of fixing domestic posts. … Postcrete may not be used for general concreting, screeds, mortar, grout or render. If a particular compressive strength is required, Postcrete should not be used.
How long will a treated 4×4 post last in the ground?
The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.
How much concrete do I need for a metal fence post?
Each hole for the terminal posts must be 8 inches in diameter and 30 inches deep, requiring 0.85 cubic feet of concrete to fill.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
What is the best concrete mix for fence posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).
How do you keep fence posts from rotting in concrete?
Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.
How long does a pressure treated post last in the ground?
40 yearsAccording to Forest Products Laboratory and other research agencies, pressure treated poles in the ground can stay up to 40 years without any signs of rot.
How deep does the hole need to be for a fence post?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Will fence posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.