Can You Reshape Kydex?

Is kydex bad for guns?

KYDEX lasts longer than cheaper plastic and it’s far less likely to damage your firearm, no matter how many times you holster and un-holster your gun.

For example, the KYDEX has to be heated to a precise temperature and cooled properly.

KYDEX and gun wear.

Any holster can wear the finish of your pistol..

Can you microwave kydex?

Because kydex doesn’t have water in it, it shouldn’t or won’t work very well and, depending on its resonance frequency, might not heat up at all.

How much is a sheet of kydex?

Volume Discount AvailableVolume Discount Available Price/Unit0-12-716-31$5.27$4.99$4.453 more rows

What temp does kydex deform?

Kydex molds at about 150-200(fixed) degress f. Blueing is done hot and I know that steel and aluminum both will take much higher temperatures before distortion occurs….

Can you reheat kydex?

Heat the Kydex with a heat gun until it’s very pliable. Insert the gun, and mash the entire holster/gun with a piece of foam. If you screw it up, reheat it and do it again. Kydex is very forgiving and tries to revert to a flat sheet when heated.

Is kydex a PVC?

KYDEX sheet is an extremely durable acrylic/PVC alloy extruded in a range of colors, patterns, textures, thicknesses, and grades to optimize long-term performance, appearance, and cost effectiveness across demanding and diverse end-use applications.

Is kydex toxic?

KYDEX thermoplastic sheet dry blend, a powder, is in general a non-hazardous polymeric material and does not present any serious hazards during its normal handling and use.

Can you plastic weld kydex?

Plastics that can be welded are PVC, polyethylene, polycarbonates and nylons. … KYDEX® sheet can be joined to itself and to other materials by hot gas welding. The sheet edges to be joined should be beveled to accommodate the bead, which produces the weld.

Can you glue kydex?

Cyanoacrylate adhesives (e.g. “Super Glue”), such as Loctite’s Super Bonder 400 series Instant adhesive (contact Loctite in the US at 800-562-8483 or on the Web at, yield very high joint strength for bonding KYDEX® sheet to itself or to other materials.

How are Kydex holsters made?

In order to create a KYDEX holster, manufactures heat a sheet of plastic and mold it around a form at point point they cut off the excess material and polish the finished holster.

Is Boltaron better than kydex?

Deep Carry holsters are made of Boltaron, an improvement on Kydex that’s made in the USA 🇺🇸, not imported. Boltaron has more heat resistance and other characteristics which set it apart.

Which is better leather or kydex?

It really comes down to personal preference which is better. Kydex holsters come out on top when it comes to retention and reholstering. Leather holsters take the crown when it comes to comfort and style.

Can you heat kydex with a hair dryer?

A hair dryer is not hot enough, you will need to heat Kydex to 300F+, which means a heat gun. Just be careful not to melt the plastic completely. Keep the heat gun moving, don’t let it stay in one spot. … Hair dryer works fine.

When was kydex invented?

1965Our origins. The KYDEX® Thermoplastics story actually began more than 30 years ago, in 1965, when KYDEX® 100 was invented near Philadelphia at the Rohm & Haas Co.

What is kydex material?

Kydex is a line of thermoplastic acrylic-polyvinyl chloride materials manufactured by Sekisui SPI. It has a wide variety of applications, including for aircraft bulkheads, firearm holsters, sheaths, and for knives.

Will Kydex holsters scratch my gun?

Kydex Holsters Leave Marks on My Gun’s Finish. … But the concern towards rub marks is real and can also be found with leather holsters. In fact if a gun is drawn and re-holstered enough times it will leave rub marks on any finish whether it is leather or plastic.

Does heated kydex smell?

Kydex tends to smell a little when getting hot, and it lingers in the oven.